What are the requirements of the turntable for rail ferry transfer car?

A simple operation of the long life of the rail ferry transfer car.It has a lot advantages. It is a good helper.I will give you more detail information.
The requirements of the turntable for rail ferry transfer car as follows:

1.Control system

There is a control box on the ground, and there are left-hand, right-hand, jog, and abort buttons on the control box, and corresponding indicators are provided.

2.Rust coating requirements

The surface descaling of steel plates, profiles and castings and forgings reaches ST2 in GB8923. The film thickness is 90-120um. All exposed working surfaces are rust-proof before leaving the factory. The surface is coated with anti-rust primer, dark gray finish, and the guide rail is not painted.

3.The control box system

The control box is made of steel plate, which is beautiful and useful. The surface is made of anti-corrosion treatment. The thickness of the box is not less than 2 mm. It has excellent heat-dissipating equipment. There are useful inspection lights in the control box. The door lock is firm and reliable, easy to use and does not interfere.

4.Equipment and equipment

All kinds of famous brand industrial components should be selected to provide sufficient guarantee for the overall reliability of the equipment.

5.Frame system

The frame structure of the frame is composed of a longitudinal beam, a beam and a steel plate, and a "#" character skeleton frame structure is arranged, and a steel plate is laid on the work surface. The profiles and steel plates used are in accordance with the corresponding national standards.

6.Transmission system

The motor drives the reducer to transmit power to the inverting device to drive the rotary table to rotate. Each component is firmly integrated with the main body. The motor is equipped with a brake motor with a degree of protection of IP44 and an insulation class of E.

7.Equipment structure

The carousel consists of a frame, a rotating table, a driving device, a control box and the like. The rotating table body is equipped with guide rails. The rotating table is composed of reversing equipment and work surface produced by the introduction of German advanced patent technology, and can be rotated 90 degrees. It has the characteristics of rotation sensitivity, quick response, and safe performance and safety. The track docking is realized by the frequency converter to realize automatic deceleration control, and an electronically controlled safety limit device is provided between the two positions of 90 degrees to ensure accurate positioning when the rotary table rotates, so that the body guide rail and the ground track are excellent in alignment; There are auxiliary support wheel sets to ensure the safety and stability of the rotating table.