What are the requirements for turning on industrial electric turntable？
2020-01-15
What are the requirements for turning on industrial electric turntable？
1. Equipment structure: Industrial electric turntable is composed of frame, rotating table, driving device, control box, etc. It has the characteristics of flexible rotation, fast response and reliable performance. The track is docked to achieve automatic deceleration control through a frequency converter, and an electronically controlled limit device is installed between the two 90-degree positions to allow accurate positioning of the turntable when it rotates.
2. Frame system: The plate frame structure for the frame is composed of longitudinal beams, cross beams and steel plates with a "#" skeleton plate frame structure, and steel plates are laid on the work surface. The used profiles and steel plates meet the corresponding national standards.
3. Transmission system: The motor drives the reducer, transmits the power to the turning device, and drives the rotary table to rotate.
4. Control system: There is a control box on the ground. The control box is equipped with left-hand, right-hand, jog, and stop buttons, and is equipped with corresponding indicators.
5. Derusting coating requires derusting on the surface of steel plates, profiles, castings and forgings. Anti-rust treatment is performed on all exposed processed surfaces before leaving the factory. The surface is coated with anti-rust primer, dark gray top coat, and the guide rail is not painted.
6. Control box system: The control box is made of steel, beautiful and practical, the surface is anti-corrosive, the thickness of the box is not less than 2 mm, there is a good heat dissipation device, and a practical inspection lamp is installed in the control box.
7. Equipment configuration: Industrial components should be selected to provide sufficient guarantee for the overall reliability of the equipment.
Facebook
Linkedin
