How to control the cable reel transfer carts?

With its unique advantages, cable reel transfer carts are gradually being used by many companies. However, how to correctly operate the cable reel transfer carts to ensure the safe and effective operation of the flat car is a problem that cannot be ignored.

The correct operation of the cable reel transfer carts, mainly to do the following:

1. The user must arrange for the operation and maintenance of the cable reel transfer carts. Before use, the operator must read the product manual carefully to understand the performance and maintenance knowledge of the track flat car.

2. Do not place any items unrelated to transportation within one meter of each side of the running cable reel transfer carts.

3. The materials should be evenly distributed on the flat surface, and overloading is strictly prohibited.

4. The cable reel transfer carts must start smoothly after the ringing. During operation, the operator should concentrate on it, always pay attention to the surrounding and no abnormal conditions, and be ready to stop at any time. During operation, the flat car must not touch the "stop" at the end of the track.

5. During operation, the cable reel transfer carts should run at a slow speed, and it is strictly forbidden to change the direction of travel quickly.

6. During the journey, it is forbidden to overhaul and clean the cable reel transfer carts. It is strictly forbidden to use the cable reel transfer carts to top, hit, drag and pull other vehicles or objects on the track.

7. After overhaul, it must pass the acceptance of the use unit and meet the safety requirements before it can be used again. It is strictly forbidden to use the disease.

8. In case of sudden power failure during work, the control switch should be returned to zero position; after the work is completed, the power must be cut off, the load removed, and the equipment cleaned.

9. When using the flat car for the first time, be sure to fill the gear oil of the reducer. During use, ensure that the reducer has sufficient oil and check for oil shortage and oil change.