Why battery-type flat panel electric vehicles are completely battery-powered
2022-01-20
Why battery-type flat panel electric vehicles are completely battery-powered .
In general, when adding electrolyte to the battery, the following points should be noted:
During the battery charge and discharge process, due to electrolysis and evaporation, the moisture in the electrolyte gradually decreases, resulting in a decline in the surface of the electrolyte. If the raw materials are not replenished in time, the life of the battery will be shortened. Add distilled water to be replenished in time, do not drink pure water.
If the concentration of the electrolytic solution is too high, the small hole in the battery cover will overflow. Electrolyte conduction. Self-discharge occurs when passing through the positive and negative poles of the battery. If this is the case, the electrolyte should be wiped off or rinsed with boiling water.
.jpg)
If the electrolyte is accidentally dropped into the battery pack when adding electrolyte, do not move the metal, and the impurities are clamped with a wooden stick. When using iron wire or copper wire, due to the corrosion of sulfuric acid, metal molecules enter the battery, generating self-discharge, thereby damaging the battery.
The electrolyte level height is 10-15 mm. The battery has two red lines, and the electrolyte must not exceed the upper limit of the red line.
This article introduces the problems that should be paid attention to when the battery electrolyte is used on the level vehicle. If you are interested in reading tablets, you can visit our website, thank you!
Facebook
Linkedin
