How to use the battery of the battery trolley longer
2021-12-03
The surface of battery components, connecting wires, and bolts should be clean. If battery overflow occurs, flush with water in time to prevent leakage and increase internal resistance.
Battery wiring must be intact, and often check whether the battery connection fastening nuts are loose to prevent sparks or pole column burn.
It is strictly forbidden to place any objects inside the battery pack, and the positive and negative poles of the battery pack should not be connected directly to avoid short circuit and damage to the battery pack.
.png)
trackless cart
The battery should be charged in time after discharge. If it is not used for a long time, it should be filled with power and replenished on a monthly basis to save electricity.
During the use of the battery, due to the evaporation of electrolyte and electrolyte, resulting in higher concentration of electrolyte and lower liquid level (especially in summer), distilled water must be added in time, and no other water sources should be added.
After the battery is loaded into the battery, weld with welding wire to prevent sparks and reduce contact resistance, to ensure that the battery line is safe and smooth in special circumstances.
Battery pack polarity markings (+ and -) and electrical equipment during installation must be met. If the battery pack is not properly installed, it may cause a short circuit or charging, resulting in a sharp rise in battery pack temperature.
Facebook
Linkedin
