A profile of perfect accumulator voltage
2018-05-08
A profile of perfect accumulator voltage
Perfect handling equipment co., LTD., henan production battery power supply, The electric flat rail car. Is The only one don't need an external power supply, built-in power supply device of electric rail car plate, so The car accumulator voltage is mainly depends on The types and quantity of battery.
The electric flat rail car. Commonly used battery voltage is 2 v and 6 v/section/section, and The pallet load under 63 tons, configure an accumulator voltage, configuration is 48 v, usually requires 24 section of The single section 2 v or 8 section of The single section 6 v battery. In the case of an electric flat rail vehicle weighing more than 63 tons, the typical battery needs to be configured with a voltage of 72V. . In fact, The electric flat rail car on The number of battery, according to The size of The load, The configuration is different, it can according to customer's specific special requirements, configuration with 36 v or smaller or larger. So The electric flat rail car is configured with a different battery voltage, so The voltage of The motor is also different. It needs to be matched with accumulator voltage. The same is true for a matching charging electromechanical pressure.
Due to the battery power of electric flat rail car, it will be limited by its working time, so The capacity of accumulator voltage are all configured according to actual situation of customer.
Facebook
Linkedin
