Introduction to electric transfer car track laying method
2022-12-08
Introduction to electric transfer car track laying method
The track installation model of electric transfer car is usually P18.P24.P43(P18 explains: light rail, weighs 18 kg per meter) and other kinds of, usually light rail, electric flat car track above 100t needs to use heavy rail, the smaller the tonnage, the smaller the selected track.
Electric transfer car rails are fitted with track treads raised above the ground. Generally speaking, the electric flat rail with a load of more than 5 tons needs to make the foundation, so as not to damage the workshop foundation, the foundation needs to be embedded bolts, suitable for rail determination, electric flat rail installation, secondary pouring ground.
The above is the introduction of common track laying method.
So the daily maintenance of electric flat car is still very necessary.
Easy to achieve remote control and automation, battery electric transfer car correct charging can increase the battery so that the use of high frequency occasions must have.
There is a series of battery-powered electric flat car, and do a good job of the isolation measures around the flat car, 2, electric flat car is not powered on: whether the electric system to the electric transfer car power supply, the shelf body should be fixed together with the bottom plate.
# "frame structure, under the action of indoor and outdoor static pressure difference, double girder bridge crane is usually a mechanical electrical and metal structure.
According to the different power supply mode, it can be divided into cable reel powered track flat car, tow cable powered track flat car, battery powered track flat car, etc.
When using low voltage track electric transfer car, the track is required to be insulated from the ground because the track is electrified. Before installing the track, it is necessary to lay an insulating pad on the foundation. If the quality can be paved with a layer of asphalt, embedded bolts should also be used as insulation bolts, and the rail pressing plate should be used as insulation materials.
If you buy our company electric flat car, our company free of charge for you to design the track foundation drawings, electric transfer car rail installation drawings and installation instructions.
Facebook
Linkedin
