Safe transportation good helper 5 ton low voltage transfer trolley
2020-04-26
Safe transportation good helper 5 ton low voltage transfer trolley
5 ton low voltage transfer trolley has the characteristics of good power performance, compact structure, stable and reliable operation. If it is a three-phase low-voltage rail power supply series of rail-powered electric flat cars, the motor uses YZ series crane metallurgy motor, rated voltage 380V, rated frequency 50HZ, power: 3.7 ~ 7Kw, insulation level： It is Class F, protection class IP44, and the power of the motor can be selected according to the rated tonnage of the electric flatbed.
5 ton low voltage transfer trolley reducer:
Adopting heavy-duty standards in the hoisting and transporting industry, dedicated to axle-mounted hard-tooth flat cars, compact structure, high reliability, good versatility, easy installation and maintenance. The gears are made by carburizing, quenching and grinding, and are produced by professional gear manufacturers.
Conductive slider:
The conductive slider is an important part of the entire flat car. Its main function is to take power. We can also call it a power take-off device. The device is in contact with the rail and transmits electricity to the motor after power is taken.
On board control box: (if remote control is installed, the effective distance is 100 meters)
The on-board control box is composed of a control box and a control cable. The operation box is provided with forward, backward and emergency power-off buttons, and the operation cable length is about 2.5 --3m. The on-board operation box can be stored in the box on the side of the flat car when not in use, and taken out for operation when in use.
Audible alarm:
In order to remind 5 ton low voltage transfer trolley to run, other staff should pay attention to avoid and ensure safety. A new type of sound and light warning integrated alarm is installed at both ends of the front of each flat car.
Electric flat car control box
The on-board control box is installed on the lower side of the frame of the electric flat car for protection. The electrical components are all high-tech and reliable. The control system is equipped with leakage protection switch overload protection and emergency power-off control elements, and the control loop is set to a safe voltage of 36v. The whole set of electrical equipment has power distribution protection, short circuit protection, over current protection, voltage loss protection, zero position protection, emergency power off protection, safety signs, etc., which ensures the transmission performance, control performance, safety protection performance, accuracy, reliability, and emergency situations Safe parking. Therefore, it is safer and more reliable to use our products.
Facebook
Linkedin
